(1) Electrostatic safety workbench: It is composed of workbench, anti-static table mat, wrist strap connector and grounding wire.
(2) There should be more than two wrist strap joints on the anti-static table mat, one for operators and one for technicians or inspectors.
3) Plastic boxes, rubber, cardboard, glass and other debris that are prone to static electricity are not allowed to be stacked on the static safety workbench. The drawings and materials should be placed in an anti-static document bag.
(4) Anti-static wrist strap. Persons who directly touch static-sensitive components must wear an anti-static wrist strap, and the wrist strap should be in good contact with the human skin.
(5) Anti-static container. The component holding bags, turnover boxes, PCB loading and unloading racks in the production site should have static electricity protection. Metal and ordinary containers are not allowed, and all containers must be grounded.
(6) Anti-static overalls. People who enter the electrostatic work area and those who come into contact with SMD components must wear anti-static work clothes, especially in a dry environment with a relative humidity of less than 50% (such as winter). The work clothes fabrics should meet the relevant national standards.
(7) Those who enter the work area must wear anti-static work shoes, and those who wear ordinary shoes should use conductive shoe bundles, anti-static shoe covers or heel straps.
(8) The conveyor belts and drive shafts used on the production line should be equipped with anti-static grounding brushes and support rods.
(9) Ion wind static eliminator can be used on the surface of the conveyor belt.
(10) The assembly jigs, testing jigs, welding tools and various instruments used in the production site should be equipped with good | good grounding wires.
(11) An anti-static test bench should be installed at the entrance of the production site, and everyone who enters the production site should undergo an anti-static test. Only after passing the test can enter the site