Morphology 6U VPX 5HP
Processor Fit FT1500A-16 processor (16 Core, 1.5GHz)
Memory DDR3 surface-mounted memory granules, working rate of 1600Mbps, ECC support, capacity of 16GB/32GB
1 mSATA interface (SATA3.0) is stored.
1 on-board 64GB SSD
Two SATA3.0 interfaces are connected to the backplane.
The network interface 2 Serial RapidIO (SRIO x 4) is connected to the backplane.
2 40GBASE-KR4 is connected to the backplane.
The 4-way 1000BASE-X Ethernet interface is connected to the backplane.
1 standard gigabit debugging network port is connected to the front panel.
USB interface 2-way USB 2.0 is connected to the front panel aggregation port.
4-way USB 2.0 connected to backplane
Interface 1 VGA is connected to the front panel.
2-way VGA is connected to the backplane;
2 DVI is connected to the backplane;
PCIE 2-way PCIe3.0 x 8 is connected to the backplane.
Other interfaces: 2 IPMB management buses, reset signal, serial port and GPIO.
Operating system Linux, Galaxy Kirin
Maximum power < 120W Heat dissipation by air cooling (optional cooling) Working environment temperature: -40 ~ 55oC (Note: realized with the whole machine) Storage environment temperature: -40 ~ 85oC CPU-1500A/4, quad-core @1.5GHz On-board 4GByte purple memory granules (single capacity 512MByte) 4-channel 10/100/1000M network adaptive, default first out; LAN1, LAN2 can be selected after the exit. On-board 64GByte SSD solid state drive (SATA3@6Gb/s) Hard disk interface 2-way SATA3, 6Gb/s PCIe 1-way PCIe 2.0 ×1 interface USB interface 2 USB 2.0, 4 USB 3.0/2.0 Three RS232 serial ports, including two RS232 serial ports (which can be switched back and forth) and one RS232 debugging serial port. The embedded GPU chip SM750 is used to display, which supports 1 channel VGA display, and the maximum resolution of 1920*1440 can be selected. GPIO 4-way GPO,4-way GPI RTC Watch Dog has Support 12V or 5V and 5VSB direct power supply. ATX power interface is supported Typical power consumption ≤18W (standard atmospheric pressure, room temperature 25℃) Maximum power consumption of the whole board ≤25W (standard atmospheric pressure, room temperature 25℃, full CPU load, full memory load) Operating system supports Galaxy Kirin operating system, Debian 9, CentOS, kernel 4.4.98. BIOS UEFI Support dual boot mode: Grubouefi (image)/Uboot compatible mode (uImage) Support graphical configuration interface UEFI shell support Support customization of boot interface (additional cooperation agreement is required) Support CD boot/install operating system Support USB flash drive to start/install operating system UEFI firmware upgrade is supported (via USB flash drive upgrade) Ci bus 32-bit CPCI local bus (33mhz) Size 160mm×100mm (8HP) Operating temperature-40℃ ~+70℃ Storage temperature -55℃~+80℃ Temperature protection supports overheat protection function (high temperature valve value can be set). Support automatic fan speed regulation function.