SMT 56mm Label Feeder for FUJI AIMEX

SMT 56mm Label Feeder for FUJI AIMEX is a pick-and-place peripheral label feeding module that auto-separates, peels, and positions labels (5-56mm wide) for suction nozzle pickup on FUJI AIMEX placement machines. Also referred to as a FUJI AIMEX 56mm label feeder, it handles paper, PET, Mylar, anti-static film, and synthetic-paper labels for PCB serialization, barcode tagging, QR code application, and component identification. The feed stroke is adjustable from 5 to 56mm. This SMT 56mm label feeder plugs directly into the FUJI intelligent feeder slot,no external controller, power supply, or PLC required.

A label roll is mounted on the unwind spool of this SMT 56mm label feeder for FUJI AIMEX. A stepper motor drives the liner through a front-positioned peeling blade — the label separates from its backing at 3-9 m/min and advances to a fixed presentation position. A fiber optic sensor detects the label edge and signals the motor to stop, holding the label at the pick window for the FUJI AIMEX placement head. After pickup, the motor advances the next label, and the spent liner is collected on a motor-driven rewind spool synchronized with the unwind motor. The front-push design minimizes the label’s free-air path from peel edge to pick point, achieving ±0.25mm placement accuracy. This SMT 56mm label feeder draws 24V DC and communicates via the FUJI AIMEX intelligent feeder slot,no external controller or PLC needed.

• Front-push peel eliminates label drift: rear-pull feeders route the liner under the feeder body, increasing the label’s unsupported path and causing edge curl on placement. This SMT 56mm label feeder for FUJI AIMEX positions the peeling blade at the front, minimizing free-air travel,placement accuracy ±0.25mm across the full 56mm label width.
• Multi-material auto-detection without recalibration: paper, clear PET, metallic Mylar, anti-static film, and synthetic-paper labels feed on the same SMT 56mm label feeder. Fiber optic edge sensing auto-compensates for material translucency differences,switch between paper and transparent PET labels without manual sensor adjustment.
• Motor-driven synchronized spooling with constant liner tension: the rewind spool runs in synchronized speed ramps with the unwind motor on this SMT 56mm label feeder. Liner tension stays within ±5% across the full roll,no liner breakage or slack accumulation during high-speed operation.
• FUJI AIMEX plug-and-play, zero external setup: this SMT 56mm label feeder draws 24V DC directly from the FUJI intelligent feeder slot and communicates via the slot’s data interface. No external power supply, no PLC programming, no separate controller,insert the feeder and the FUJI AIMEX recognizes it immediately.

PCB serialization and traceability: on FUJI AIMEX lines, QR codes, serial numbers, and date-code labels (5-56mm) are applied to each board in-cycle. This SMT 56mm label feeder for FUJI AIMEX auto-peels and positions labels at 3-9 m/min, eliminating manual label application stations.

Component barcode and ID tagging: connectors, shield covers, and modules requiring identification labels are fed directly to the FUJI AIMEX placement head via this SMT 56mm label feeder. The 56mm channel handles standard-sized labels for most electronic assemblies.

QC pass/fail and inspection marking: after AOI or functional test, pass/fail indicators are printed on-demand as labels. This SMT 56mm label feeder feeds inspection labels into the placement cycle, enabling automated QC marking without operator intervention.

High-mix production with quick label changeover: different products require different label sizes and materials. Fiber optic auto-detection and adjustable feed stroke on this SMT 56mm label feeder for FUJI AIMEX enable size changeover in under 2 minutes without mechanical retuning.

---

Backed by engineers with over a decade of experience in SMT whole-line integration, we deliver more than just custom feeders and nozzles. Our team designs complete SMT production lines,from pick-and-place and reflow to material handling,precisely configured to your specific product mix, throughput targets, and floor layout.

Our Custom Engineering & Testing Process
You only need to provide component samples and machine model numbers. Based on your exact part dimensions, our engineers design custom feeder adapters and CNC-machine each rail from scratch. We strictly avoid off-the-shelf parts or generic sizes to ensure optimal orientation. Before leaving our Shenzhen factory, every unit undergoes a full operational test on a matching machine, and we provide a performance video so you can verify its functionality prior to delivery.

Machine Compatibility
We provide dedicated rail adapters for all major SMT brands, including ASM SIPLACE, YAMAHA, FUJI, Panasonic, JUKI, and Samsung.

Lead Time & MOQ
Tag and Tube Feeders: 2–4 weeks.
Vibratory Bowl Feeders (Custom Rails): 3–6 weeks.
MOQ: 1 unit. We support single-unit testing on your production line before scaling to mass production.

Custom Nozzles & Integrated Shipping
We fabricate custom nozzles from ceramics, tungsten carbide, and rubber, precision-formed to match your specific part geometry while maintaining a feed failure rate below 0.5%. To streamline your procurement, feeders and nozzles are shipped together in a single package.