1. Cut the SMD Tape squarely across the sprocket hole on each face.
2. Peel off upper tape of Tape Connector (retaining adhesive strips).
3. Align raised dots of the clear plastic carrier with the sprocket holes.
4. Align both end of the SMD tape and the joining tape.
5. The first adhesive strip then joins up the SMD cover tape ends.
6. Fold the Tape Connector around the now joined SMD component tapes and press firmly together
Based Material: PE
Adhesive: Acrylic Adhesive
Color: Yellow, Blue, Black
Size: 8mm, 12mm, 16mm, 24mm, 32mm
Heat Resistance: Short term 50℃, Long term 40℃
Feature: Easy operating and saving labours, reliable and hihg accuracy, remaining is fully utilized, clip and single splice tape in one strip, accurate connecting with SMT splice.
Usage: Use for connecting the end of a depleted reel of components with the beginning of a new reel without shutting off the SMT machine.
Packing; Packed by shrink film and bubble film, and then laod into a stable carton, customized packaging.
