Large Electrolytic Capacitor Feeder – High-Load Radial Tape Feeder
The Large Electrolytic Capacitor Feeder is a floor-standing, high-load radial tape feeder built for components that standard feeders cannot carry: large electrolytic capacitors from Ø8 to Ø35 mm in diameter, up to 60 mm tall and 80 g each. It stands beside the placement or insertion line and presents each capacitor at a fixed pick-up position — beyond standard feeder capacity without occupying a single feeder slot.
Standard radial feeders are sized for small-signal parts. A Ø16 × 25 mm aluminum electrolytic weighs 15–20 times a signal diode, its tape carries 44 mm-wide carrier foil, and a full reel can reach 15 kg. Mount that on a machine feeder bank and the result is tape sag, torn sprocket holes, and a bank loaded past its rated carry.
The high-load feeder answers with a servo-driven sprocket index, a reinforced tape channel, and a floor-standing reel holder that takes the weight off the machine. Feed rate holds 3,000–6,000 CPH, and an optional cut-and-clinch module trims and bends the leads as each capacitor is presented.
Boards that carry this class of part — power supplies, inverters, EV chargers, industrial drives — use one to four large caps per board. A single floor-standing unit feeding from a 15 kg reel covers a full shift of those boards without an operator touching the tape.
Why Standard Radial Feeders Fail on Large Electrolytic Capacitors
Three failure modes show up when a heavy radial part meets a feeder built for signal diodes.
Tape sag and pitch drift. Carrier foil for a Ø35 mm can is wide and heavy. On a light-duty indexer, the tape bows between sprocket holes and the component pitch drifts — the pick head grabs at a position the tape no longer holds.
Sprocket hole tear-out. Indexing torque rises with reel weight. A light-duty drive yanks the tape at every step, and the perforations elongate or tear, which stops the line until the tape is re-threaded.
Bank overload. A full reel of large electrolytics can weigh 15 kg. Feeder banks and rail brackets are rated for tape feeders in the 1–3 kg class; a heavy reel cantilevered off the bank wears the rail and introduces vibration into every pick on that slot.
The large electrolytic capacitor feeder removes all three at once: the reel stands on the floor frame, the servo indexes with controlled torque, and the channel supports the full tape width.

Key Features & Specifications
| # | Item | Specification | Why It Matters |
| 1 | Feeder type | Floor-standing high-load radial tape feeder | No feeder slot consumed on the machine |
| 2 | Capacitor range | Ø8 – Ø35 mm, height to 60 mm | Covers large aluminum electrolytics beyond standard capacity |
| 3 | Component weight | Up to 80 g | Handles parts light-duty feeders drop or misfeed |
| 4 | Tape width | 26 mm / 44 mm radial tape | Correct carrier for large-diameter cans |
| 5 | Lead pitch | 2.0 / 2.5 / 5.0 mm | Matches standard electrolytic lead spacing |
| 6 | Feed rate | 3,000 – 6,000 CPH (0.6 – 1.2 s) | Realistic speed for heavy radial parts |
| 7 | Drive | Servo-driven sprocket indexing | Controlled torque — no tape tear-out |
| 8 | Reel capacity | Ø400 mm, 15 kg per reel | Full-shift runs without reel changes |
| 9 | Optional module | Lead cut-and-clinch | Presentation-ready leads for insertion |
| 10 | Frame | Single-column floor stand with base plate | Anchors to floor; zero machine load |
| 11 | Sensors | Reel-end and jam detection with line signal | Stops before placement errors occur |
| 12 | Compatible machines | FUJI, YAMAHA, JUKI, Panasonic, Siemens ASM, Samsung / Hanwha | Matched pick-up bracket per machine model |
| 13 | Power | 110 / 220 V AC, 50 / 60 Hz | Standalone operation |
| 14 | Dimensions (L×W×H) | 650 × 500 × 1,300 mm | Fits beside the line |
| 15 | Customization | Channel, pitch, and bracket per tape sample | Non-standard tapes supported |
Installation and Changeover
- Position the frame beside the machine and bolt the base plate to the floor.
- Match the pick-up bracket to your machine model and head travel height.
- Load the reel, thread the tape, and run a 20-component feed test.
- Changeover between tape types: swap the channel insert (tool-free, under 10 minutes).
No machine modification is required. The unit integrates through the pick-up position and, when ordered with the communication option, through a status line to the machine controller.
What We Do for Your SMT Production Line?
You only need to provide component samples and machine model numbers. Based on your exact part dimensions, our engineers design custom feeder adapters and CNC-machine each rail from scratch. We strictly avoid off-the-shelf parts or generic sizes to ensure optimal orientation. Before leaving our Shenzhen factory, every unit undergoes a full operational test on a matching machine, and we provide a performance video so you can verify its functionality prior to delivery.
We provide dedicated rail adapters for all major SMT brands, including ASM SIPLACE, YAMAHA, FUJI, Panasonic, JUKI, and Samsung.
Tag and Tube Feeders: 4–7 weeks.
MOQ: 1 unit. We support single-unit testing on your production line before scaling to mass production.
We fabricate custom nozzles from ceramics, tungsten carbide, and rubber, precision-formed to match your specific part geometry while maintaining a feed failure rate below 0.5%. To streamline your procurement, feeders and nozzles are shipped together in a single package.

| Category | Description |
| LABEL FEEDER | Mounts on SMT pick-and-place machines to apply labels, protective films, and thermal pads to PCBs. YINUO builds label feeders compatible with JUKI, FUJI, YAMAHA, ASM, and Panasonic platforms. |
| ASM FEEDER | Precision component delivery systems for Siemens ASM SIPLACE pick-and-place lines. YINUO supplies ASM-compatible tape, tube, and tray feeders for SIPLACE SX, X, and D series. |
| FUJI FEEDER | Delivers surface-mount components to FUJI NXT, XP, and AIMEX series placement heads. YINUO provides FUJI-compatible tape, tube, tray, and vibratory bowl feeders. |
| JUKI FEEDER | Core component delivery systems for JUKI RS, KE, FX, JV, and JM series machines. YINUO supplies tape, tube, tray, label, radial, axial, and custom odd-form feeders. |
| PANASONIC FEEDER | Serves Panasonic NPM, CM, and BM series pick-and-place machines. YINUO builds Panasonic-compatible tape, stick, and tray feeders with electric and pneumatic indexing. |
| SAMSUNG FEEDER | Supports Samsung (Hanwha) SM, SLM, and DECAN series platforms. YINUO supplies electric 8 mm feeders, dual-track tube feeders, and custom feeders for non-standard components. |
| THT CUSTOM FEEDER | Handles through-hole components on SMT odd-form modules or dedicated THT insertion machines. YINUO builds custom radial, axial, and odd-form feeders engineered to your component sample. |
| UNIVERSAL FEEDER | Machine-agnostic feeding systems compatible with multiple pick-and-place platforms. YINUO manufactures floor-standing tube feeders, vibratory bowl feeders, and cross-brand custom solutions. |
| YAMAHA FEEDER | Mounts on YAMAHA YSM, YS, and YG series pick-and-place machines. YINUO provides YAMAHA-compatible tape, stick, and tray feeders with quiet electric options. |










