Tag Archives: New Upgraded Intelligent Storage Cart-SMT Intelligent storage cart

Precautions for wave soldering machine operation—Wave Soldering Finger

1. Earnestly accept the operation training of the equipment manufacturer, and be able to operate wave soldering independently and skillfully according to the chapter. 2. Maintenance of the spray system: During wave soldering, the nozzle should be cleaned with alcohol every 8 hours, and the nozzle should be cleaned when it is out of service. […]

Analysis of several common defective products in SMT surface assembly process

The tombstone is also known as the suspension bridge and the Manhattan phenomenon. It refers to the two Korean-end surface-mounted components. After reflow soldering, one of the ends leaves the surface of the pad. The entire component is inclined or upright, like a stone monument, as shown in the figure. As shown, one end of […]

Main characteristics of PCB metal-based copper clad laminate production process

The metal base copper clad laminate is generally composed of a metal substrate, an insulating dielectric layer and a conductive layer (usually copper foil). That is, one or both sides of the metal substrate with the surface treated are covered with insulating medium and copper foil, and then composited by hot pressing . (1) Classification […]

New Upgraded Intelligent Storage Cart-SMT Intelligent storage cart

-The delivery time is reduced from two hours to 15 minutes, and the efficiency is increased by 8 times – each shelf can be unordered storage of 1400 trays of materials, inventory area can be saved by 40% – the location of each material can be checked quickly, and the inventory time can be reduced […]