88mm Label Feeder for SMT FUJI Machine is an SMT peripheral label feeding module designed to auto-separate, peel, and position wide labels (up to 88mm) for suction nozzle pickup on FUJI placement machines. Also referred to as an 88mm SMT label feeder or FUJI wide label feeder, it handles paper, PET, Mylar, anti-static, and synthetic-paper labels for PCB serialization, barcode tagging, and component identification. The 88mm channel width accommodates oversized labels — panel tags, multi-field serial labels, and large QR codes，that exceed the capacity of standard 56mm label feeders.
Working Principle
A label roll is mounted on the unwind spool of this SMT label feeder. A stepper motor drives the liner through a front-positioned peeling blade，the label separates from its backing at 3-9 m/min and advances to a fixed presentation position. A fiber optic sensor detects the label edge and signals the motor to stop, holding the label at the pick window for the FUJI placement head. After pickup, the motor advances the next label, and the spent liner is collected on a motor-driven rewind spool synchronized with the unwind motor. The front-push design of this SMT label feeder positions the 88mm-wide peel edge parallel to the pick plane, reducing label drift and ensuring ±0.1mm placement accuracy even on full-width labels. The feeder plugs directly into the FUJI intelligent feeder slot，no external controller or PLC required.
-
88mm wide-channel front-push peel eliminates label drift: rear-pull feeders cause edge curl and placement drift on labels wider than 56mm. This FUJI label feeder positions the peeling blade at the front, keeping the 88mm peel edge parallel to the pick plane，placement accuracy ±0.1mm across the full label width, even for oversized panel tags.
-
Multi-material auto-detection without recalibration: paper, clear PET, metallic Mylar, anti-static film, and synthetic-paper labels feed on the same unit. Fiber optic edge sensing auto-compensates for material translucency differences,no manual adjustment when switching between paper and transparent PET labels.
- Motor-driven synchronized spooling with constant liner tension: the rewind spool runs in synchronized speed ramps with the unwind motor. Liner tension stays within ±5% across the full roll,no liner breakage or slack accumulation during high-speed operation on 88mm-wide labels.
- FUJI plug-and-play, zero external setup: draws 24V DC directly from the FUJI intelligent feeder slot and communicates via the slot’s data interface. No external power supply, no PLC programming, no separate controller,insert the feeder and the FUJI machine recognizes it immediately.
Application Scenarios
PCB serialization and traceability: SMT label feeder applies serial number and QR labels to each PCB before or after placement,used in automotive ECU, medical device, and aerospace manufacturing where full traceability is required.
Component barcode labeling: applies barcode labels to large IC packages, modules, and odd-form components on the FUJI NXT line,replacing manual hand-labeling stations.
QC pass/fail tagging: prints and applies pass/fail labels after optical inspection,automated labeling eliminates operator misplacement.
Multi-product changeover: stored feed profiles support quick switchover between label widths (5mm QR codes to 56mm serial plates),profile recall via the NXT host interface without mechanical adjustment.
What can we do for your SMT production line?
