The SMT Label Feeder For JUKI is a feeder-slot label applicator that peels labels from a liner-backed roll and presents them to the JUKI placement nozzle for pick-and-place like standard components. It installs in the JUKI feeder bank and can be programmed as the final placement step after solder paste printing and SPI inspection — before reflow when reflow-rated labels are used, or after reflow and AOI for final serial marking. It runs alongside standard component feeders in the same placement recipe, and the DataMatrix or QR code it places can be read by SPI, AOI and test equipment to bind each board to its process data in the MES. SMT process engineers and line operators at EMS and ODM factories producing automotive ECUs, medical devices, industrial controls and consumer electronics use it to eliminate manual labeling stations and reduce misaligned, missing or unreadable labels that disrupt downstream traceability.
Key Features
Automatic label peeling and precise presentation
A label roll is mounted on the unwind spool, and a stepper motor drives the liner through a front-mounted peeling blade. The label separates from its backing and advances to a fixed presentation position facing upward toward the JUKI placement nozzle. A fiber optic sensor detects the label edge and stops the motor at the exact pick coordinate. After pickup, the next label is advanced automatically, and the spent liner is collected on the motor-driven rewind spool.
A label roll is mounted on the unwind spool, and a stepper motor drives the liner through a front-mounted peeling blade. The label separates from its backing and advances to a fixed presentation position facing upward toward the JUKI placement nozzle. A fiber optic sensor detects the label edge and stops the motor at the exact pick coordinate. After pickup, the next label is advanced automatically, and the spent liner is collected on the motor-driven rewind spool.
Front-peel design for stable narrow-label feeding
The peel blade is positioned at the front of the feeder, so the label travels only a short distance from separation to pick-up. This helps keep narrow labels under 10 mm from drifting and supports placement repeatability of ±0.3 mm.
The peel blade is positioned at the front of the feeder, so the label travels only a short distance from separation to pick-up. This helps keep narrow labels under 10 mm from drifting and supports placement repeatability of ±0.3 mm.
Plug-and-play JUKI integration
The feeder installs directly into a standard JUKI feeder slot and draws 24V DC from the machine bus. The placement system recognizes it as a native feeder, with no external PLC, controller, or software patch required.
The feeder installs directly into a standard JUKI feeder slot and draws 24V DC from the machine bus. The placement system recognizes it as a native feeder, with no external PLC, controller, or software patch required.
MES-ready traceability
Labeling runs as a programmed placement step, so the DataMatrix or QR code is placed with the same coordinates as any other component. The code can then be read downstream by SPI, AOI, and test equipment to bind each board to its process history in the MES.
Labeling runs as a programmed placement step, so the DataMatrix or QR code is placed with the same coordinates as any other component. The code can then be read downstream by SPI, AOI, and test equipment to bind each board to its process history in the MES.
Specification
| Parameter | Value |
| Feeder type | SMT label feeder (liner-backed tape) |
| Compatible machines | JUKI RS, KE, FX series |
| Label size range | 3 × 3 mm – 50 × 50 mm |
| Label thickness | 0.05 – 0.30 mm |
| Liner width | 8 – 60 mm |
| Label materials | Paper, PET, polyimide, anti-static film, synthetic paper |
| Placement accuracy | ±0.3 mm |
| Feed speed | 2,000 – 4,000 CPH |
| Peel mechanism | Mechanical peel plate with vacuum-assisted separation |
| Feed mechanism | Stepper motor indexing |
| Mounting interface | Native JUKI feeder slot |
| Power requirement | 24 V DC (machine bus) |
| Weight | Approx. 2.5 kg |
| Dimensions (L×W×H) | 320 × 90 × 140 mm |
What We Do for Your SMT Production Line?
Backed by engineers with over a decade of experience in SMT whole-line integration, we deliver more than just custom feeders and nozzles. Our team designs complete SMT production lines,from pick-and-place and reflow to material handling,precisely configured to your specific product mix, throughput targets, and floor layout.
Our Custom Engineering & Testing Process
You only need to provide component samples and machine model numbers. Based on your exact part dimensions, our engineers design custom feeder adapters and CNC-machine each rail from scratch. We strictly avoid off-the-shelf parts or generic sizes to ensure optimal orientation. Before leaving our Shenzhen factory, every unit undergoes a full operational test on a matching machine, and we provide a performance video so you can verify its functionality prior to delivery.
You only need to provide component samples and machine model numbers. Based on your exact part dimensions, our engineers design custom feeder adapters and CNC-machine each rail from scratch. We strictly avoid off-the-shelf parts or generic sizes to ensure optimal orientation. Before leaving our Shenzhen factory, every unit undergoes a full operational test on a matching machine, and we provide a performance video so you can verify its functionality prior to delivery.
Machine Compatibility
We provide dedicated rail adapters for all major SMT brands, including ASM SIPLACE, YAMAHA, FUJI, Panasonic, JUKI, and Samsung. Beyond standard platforms, we also supply feeders for specialty, non-standard, and custom-built equipment.
We provide dedicated rail adapters for all major SMT brands, including ASM SIPLACE, YAMAHA, FUJI, Panasonic, JUKI, and Samsung. Beyond standard platforms, we also supply feeders for specialty, non-standard, and custom-built equipment.
Lead Time & MOQ
Tag and Tube Feeders: 4–7 weeks.
Tag and Tube Feeders: 4–7 weeks.
Vibratory Bowl Feeders (Custom Rails): 3–6 weeks.
MOQ: 1 unit. We support single-unit testing on your production line before scaling to mass production.
MOQ: 1 unit. We support single-unit testing on your production line before scaling to mass production.
Custom Nozzles & Integrated Shipping
We fabricate custom nozzles from ceramics, tungsten carbide, and rubber, precision-formed to match your specific part geometry while maintaining a feed failure rate below 0.5%. To streamline your procurement, feeders and nozzles are shipped together in a single package.
We fabricate custom nozzles from ceramics, tungsten carbide, and rubber, precision-formed to match your specific part geometry while maintaining a feed failure rate below 0.5%. To streamline your procurement, feeders and nozzles are shipped together in a single package.
| Category | Description |
| LABEL FEEDER | Mounts on SMT pick-and-place machines to apply labels, protective films, and thermal pads to PCBs. YINUO builds label feeders compatible with JUKI, FUJI, YAMAHA, ASM, and Panasonic platforms. |
| ASM FEEDER | Precision component delivery systems for Siemens ASM SIPLACE pick-and-place lines. YINUO supplies ASM-compatible tape, tube, and tray feeders for SIPLACE SX, X, and D series. |
| FUJI FEEDER | Delivers surface-mount components to FUJI NXT, XP, and AIMEX series placement heads. YINUO provides FUJI-compatible tape, tube, tray, and vibratory bowl feeders. |
| JUKI FEEDER | Core component delivery systems for JUKI RS, KE, FX, JV, and JM series machines. YINUO supplies tape, tube, tray, label, radial, axial, and custom odd-form feeders. |
| PANASONIC FEEDER | Serves Panasonic NPM, CM, and BM series pick-and-place machines. YINUO builds Panasonic-compatible tape, stick, and tray feeders with electric and pneumatic indexing. |
| SAMSUNG FEEDER | Supports Samsung (Hanwha) SM, SLM, and DECAN series platforms. YINUO supplies electric 8 mm feeders, dual-track tube feeders, and custom feeders for non-standard components. |
| THT CUSTOM FEEDER | Handles through-hole components on SMT odd-form modules or dedicated THT insertion machines. YINUO builds custom radial, axial, and odd-form feeders engineered to your component sample. |
| UNIVERSAL FEEDER | Machine-agnostic feeding systems compatible with multiple pick-and-place platforms. YINUO manufactures floor-standing tube feeders, vibratory bowl feeders, and cross-brand custom solutions. |
| YAMAHA FEEDER | Mounts on YAMAHA YSM, YS, and YG series pick-and-place machines. YINUO provides YAMAHA-compatible tape, stick, and tray feeders with quiet electric options. |
