SMT Dual-Track Tube Feeder for Components Requiring Forming in Placement
The SMT Dual-Track Tube Feeder for components requiring forming is a tube feeder with an inline lead-forming module: it cuts and bends each component’s leads inside the feeder, then presents the finished part at a fixed pick-up point. Two independent tracks run two separate forming programs in a single feeder slot, at 2,500–5,000 CPH.
“In placement” needs one clarification, because it changes how you specify the feeder. Forming happens before the pick, not during it — the leads are cut to length and bent to the pad pitch while the component still sits in the tube channel. The nozzle then picks a part that is already the shape your footprint needs.
That matters for any part with leads that do not match an SMD pad: axial resistors and diodes, TO-92 transistors, radial electrolytics laid flat, LEDs, and long-lead connectors. These parts arrive with straight, full-length leads. Without forming, the leads sit above the pad, the solder joint bridges, and the reflow profile fails.
A dual-track design answers the volume question. Most boards use two or three of these parts, not one. Two tracks in one slot means two components formed to two different geometries, with no second feeder slot consumed and no second setup.
Why Forming Belongs Inside the Feeder
Forming as a separate offline step works for high volume and fails for high mix. An operator forms a batch of 500 parts, the batch waits in a tray, and the line changes over before it is consumed. The formed parts then sit as inventory with a shelf life measured in bent leads.
Lead forming inside the feeder removes that queue. The component is formed at the moment it is consumed, in the quantity the board needs, with no batch to manage and no tray to track.
The second reason is repeatability. A hand former produces a bend position that varies with operator pressure — typically ±0.3 mm across a shift. A cam-driven forming module holds ±0.1 mm, which is the difference between a lead that lands on the pad and a lead that lands beside it.
The third reason is the lead length itself. Tube-packed parts ship in several lead lengths for the same body, and a fixed offline former is set up for one. An inline module cuts to a programmed length between 1.5 mm and 6.0 mm below the body, so one feeder covers the whole family.
Why Two Tracks, Not One
A single-track tube feeder with forming solves one part. Boards that need forming rarely need only one.
Consider a power supply board: one axial diode, one TO-92 regulator, one radial capacitor laid flat. Three parts, three lead geometries, three forming programs. On single-track feeders that is three slots and three setups; on a dual-track tube feeder it is one slot with two of the three handled, and the third — the highest-volume part — on a second unit.
Key Specifications
| Item | Specification |
| Product | SMT Dual-Track Tube Feeder for Components Requiring Forming |
| Feeder type | Dual-track tube (stick) feeder with inline lead forming |
| Tracks | 2 independent channels, 2 forming programs |
| Tube inner size | 10 × 2 mm to 40 × 8 mm |
| Lead forming modes | Straight cut, 90° bend, K-form stand-off, custom |
| Lead cut length | 1.5 – 6.0 mm below body |
| Forming pitch | 2.0 – 10.0 mm adjustable |
| Feed rate | 2,500 – 5,000 CPH with forming active |
| Forming accuracy | ±0.1 mm bend position |
| Air / power | 0.4 – 0.6 MPa, 24 V DC from machine bus |
| Dimensions | 320 × 90 × 140 mm, approx. 3.2 kg |
| MOQ | 1 unit |
What We Do for Your SMT Production Line?
You only need to provide component samples and machine model numbers. Based on your exact part dimensions, our engineers design custom feeder adapters and CNC-machine each rail from scratch. We strictly avoid off-the-shelf parts or generic sizes to ensure optimal orientation. Before leaving our Shenzhen factory, every unit undergoes a full operational test on a matching machine, and we provide a performance video so you can verify its functionality prior to delivery.
We provide dedicated rail adapters for all major SMT brands, including ASM SIPLACE, YAMAHA, FUJI, Panasonic, JUKI, and Samsung.
Tag and Tube Feeders: 4–7 weeks.
MOQ: 1 unit. We support single-unit testing on your production line before scaling to mass production.
We fabricate custom nozzles from ceramics, tungsten carbide, and rubber, precision-formed to match your specific part geometry while maintaining a feed failure rate below 0.5%. To streamline your procurement, feeders and nozzles are shipped together in a single package.

| Category | Description |
| LABEL FEEDER | Mounts on SMT pick-and-place machines to apply labels, protective films, and thermal pads to PCBs. YINUO builds label feeders compatible with JUKI, FUJI, YAMAHA, ASM, and Panasonic platforms. |
| ASM FEEDER | Precision component delivery systems for Siemens ASM SIPLACE pick-and-place lines. YINUO supplies ASM-compatible tape, tube, and tray feeders for SIPLACE SX, X, and D series. |
| FUJI FEEDER | Delivers surface-mount components to FUJI NXT, XP, and AIMEX series placement heads. YINUO provides FUJI-compatible tape, tube, tray, and vibratory bowl feeders. |
| JUKI FEEDER | Core component delivery systems for JUKI RS, KE, FX, JV, and JM series machines. YINUO supplies tape, tube, tray, label, radial, axial, and custom odd-form feeders. |
| PANASONIC FEEDER | Serves Panasonic NPM, CM, and BM series pick-and-place machines. YINUO builds Panasonic-compatible tape, stick, and tray feeders with electric and pneumatic indexing. |
| SAMSUNG FEEDER | Supports Samsung (Hanwha) SM, SLM, and DECAN series platforms. YINUO supplies electric 8 mm feeders, dual-track tube feeders, and custom feeders for non-standard components. |
| THT CUSTOM FEEDER | Handles through-hole components on SMT odd-form modules or dedicated THT insertion machines. YINUO builds custom radial, axial, and odd-form feeders engineered to your component sample. |
| UNIVERSAL FEEDER | Machine-agnostic feeding systems compatible with multiple pick-and-place platforms. YINUO manufactures floor-standing tube feeders, vibratory bowl feeders, and cross-brand custom solutions. |
| YAMAHA FEEDER | Mounts on YAMAHA YSM, YS, and YG series pick-and-place machines. YINUO provides YAMAHA-compatible tape, stick, and tray feeders with quiet electric options. |










