ASM SIPLACE Stick Feeder for IC Tubes

Name: ASM SIPLACE Stick Feeder for IC Tubes - Yinuo Electronics provides professional SMT peripheral equipment and AI SMT spare parts
SKU: ASM SIPLACE Stick Feeder for IC Tubes

ASM SIPLACE Stick Feeder for IC Tubes. Vibration-driven, 1/3/5 tube configurations. Supplies DIP, SOP ICs, connectors, capacitors. 220V/110V.

SKU: ASM SIPLACE Stick Feeder for IC Tubes Categories: FEEDER, THT CUSTOM FEEDER Tags: Stick Feeder, Tube Feeder

info@allaismt.com +8613760481664

Get a Free Quote

Description

The ASM SIPLACE Stick Feeder for IC Tubes mounts natively on the Siemens SIPLACE X-feeder rail — no adapter required — and supplies tube-packaged ICs (DIP, SOP, SSOP), connectors, and electrolytic capacitors to S/X/SX-Series pick-and-place machines. A pneumatic cylinder advances components down the tube at 0.3–0.5 seconds per part, while a fiber-optic sensor verifies presence at the pick position before the placement head descends. The feeder communicates via the standard X-feeder protocol bus — plug-and-play detection, same as OEM，and supports 1 to 10 tube magazines configurable per line volume.

Key Features

The ASM SIPLACE Stick Feeder for IC Tubes is a vibration-driven component supply device that mounts on the Siemens SIPLACE feeder table and delivers tube-packaged ICs (DIP, SOP, SSOP), connectors, and electrolytic capacitors to the placement head. A motorized oscillator advances components down the tube at a steady rate, with a fiber-optic sensor confirming part presence at the pick position before each pickup. The feeder is available in three tube configurations、1 tube (30mm width)、 3 tubes (100mm) and 5 tubes (custom)， letting you match tube capacity to your production volume without buying multiple OEM units.

Technical Specifications

Parameter	Value	Unit	Note
Feeder type	Vibration-driven tube / stick	—	Siemens SIPLACE feeder table mount
Tube configurations	1 / 3 / 5 tubes	—	Volume-matched
Feeder width (1-tube)	30	mm	320×30×95mm
Feeder width (3-tube)	100	mm	320×100×95mm
Dimensions (all)	320 × (30 or 100) × 95	mm	L × W × H
Component advance	Vibration oscillator	—	Motor-driven, steady feed rate
Pick-fail rate	<0.5	%	Fiber-optic pre-pick verification
Re-feed time (if missed)	<0.2	sec	Automatic on sensor trigger
Operating voltage	220V / 110V	AC	Standard mains power
Compatible machines	SIPLACE D/HF/HS/S/X/SX Series	—	All models listed above
Installation	Mount on feeder table	—	No software required
Warranty	12	months	Free replacement

Supported Siemens SIPLACE Series

SIPLACE Platform	Models	Configuration	Feeder Width	Size
D-Series	D1, D2, D3, D4, D4i	1 / 3 tubes	30 / 100mm	320×30-100×95mm
HF / HS	HF, HS60, HF3	1 / 3 tubes	30 / 100mm	320×30-100×95mm
S-Series	S20, S23, S25, S27	1 / 3 / 5 tubes	30 / 100mm	320×30-100×95mm
X-Series	X2, X4, X4i, X4S	1 / 3 / 5 tubes	30 / 100mm	320×30-100×95mm
SX-Series	SX1, SX2	1 / 3 / 5 tubes	30 / 100mm	320×30-100×95mm

Suitable for all tubular materials

DIP ICs — DIP-8/14/16/20/28/40, the standard tube-packaged IC for through-hole assembly
Radial electrolytic capacitors — cylindrical body with radial leads, tube packaging is more compact than tape
Axial components — axial resistors, diodes, inductors; tube loading is faster than tape for mixed-technology lines
Transistors (TO-92) — three-lead, tube-protected against pin bending during transport
Pin headers / SIP sockets — single and dual-row through-hole connectors, pin length exceeds tape pocket depth
Relays and small transformers — odd-form through-hole parts with body heights that cannot fit tape cavities
Tactile switches / DIP switches — through-hole switches with irregular pin spacing
Any through-hole component your supplier ships in a plastic tube — this feeder handles it.

Not Just Feeders. Nozzles, Too — Custom-Made for Your Components.

Standard nozzles struggle with odd-form parts: vacuum leaks, dropped picks, pick-fail rates above 5%. Send us your component samples. We’ll machine a nozzle matched to your part’s geometry — ceramic, tungsten carbide, or rubber — and dial the pick-fail rate below 0.5%.

Feeders and nozzles ship together. 2–4 weeks, one delivery, one freight charge.

Contact YINUO Custom Feeders and Nozzles

FAQ

Q: Are you a factory or a trading company?

A: Your feeder, from requirements analysis and prototype making to mass production, is all completed in Shenzhen—no middlemen involved. We customize according to your machine model and component specifications, and manually cut the bowl rail and rail adapter according to the sample parts you provide. You can request a video visit to the factory or send samples for testing at any time.

Q: Which SMT brands do you support?

A: ASM SIPLACE, YAMAHA, FUJI, Panasonic, JUKI, Samsung. We have corresponding rail adapters for most mainstream brands. If your machine brand is not listed, please send us your machine model, and we will confirm compatibility within 24 hours.

Q: What is the lead time for customized feeders?

A: Tag feeders and tube feeders: 2-4 weeks; Vibratory feeder feeders (requires customized bowl rails): 5-7 weeks. Samples: 5-7 working days. Rush orders can be compressed to 2 weeks (additional rush fee).

Q: What are the payment terms?

A: 30% deposit, 70% due before shipment. T/T wire transfer and L/C are accepted. Monthly settlement is negotiable for existing customers.

Q: What is the minimum order quantity?

A: 1 unit. Customized feeders do not accept large-volume orders. You will need to place a bulk order after you are satisfied with one sample unit for testing.

Q: Who are your main clients?

A: Huawei, Foxconn, Flex, BYD, Luxshare, Delta Electronics, Continental, and Pegatron. These clients use our feeders in their SMT production lines for consumer electronics, automotive electronics, and communication equipment.

Q: What if there are quality problems?

A: 12-month free warranty. Replacement parts or feeders will be shipped within 3 business days (DHL/FedEx express). We will test the feeders on-machine and record a video before shipment. Shipment will only proceed after the customer confirms satisfaction.