The YINUO electric 8mm SMD feeder feeds tape-packaged surface-mount components to Hanwha Samsung SM481 and SM482 placement heads. It runs on an internal electric motor — no shop air required. This eliminates pneumatic noise and air-line dependency, making it suitable for labs, small-batch lines, and noise-sensitive production floors.
What It Handles
- Chip resistors and capacitors (0402, 0603, 0805, 1206)
- Small inductors and ferrite beads
- SOD and SOT packaged diodes and transistors
- LEDs in 8mm tape (3528, 5050)
- Small crystals and oscillators
Key Features
| Feature | Benefit | |
| 1 | Electric motor drive | No compressed air required — works in labs and shops without air compressors |
| 2 | Quiet operation | Low noise output compared to pneumatic feeders — suitable for noise-sensitive environments |
| 3 | Drop-in compatibility | Fits Hanwha Samsung SM481 and SM482 feeder slots without adapters or wiring modifications |
| 4 | 8mm tape width | Handles standard chip resistors, capacitors, and small ICs in 8mm carrier tape |
| 5 | Plug-and-play installation | Install in the feeder slot, power on, and start placement — no calibration or air-line setup |
Technical Specifications
| Parameter | Specification |
| Tape Width | 8 mm |
| Drive Type | Electric motor (DC brushless) |
| Air Requirement | None |
| Noise Level | Low (significantly quieter than pneumatic feeders) |
| Compatible Machines | Hanwha Samsung SM481, SM482 |
| Feeder Interface | Native Hanwha Samsung slot (drop-in replacement) |
| Pitch Settings | 2 mm / 4 mm (adjustable) |
| Feed Direction | Forward (standard) |
| Power Supply | 24 V DC (via machine feeder bus) |
| Weight | Approx. 0.6 – 0.8 kg |
| Operating Temperature | 10°C – 40°C |
Each unit undergoes rigorous testing. Below is actual footage of the equipment being tested.
What We Do for Your SMT Production Line?
Backed by engineers with over a decade of experience in SMT whole-line integration, we deliver more than just custom feeders and nozzles. Our team designs complete SMT production lines,from pick-and-place and reflow to material handling,precisely configured to your specific product mix, throughput targets, and floor layout.
Our Custom Engineering & Testing Process
You only need to provide component samples and machine model numbers. Based on your exact part dimensions, our engineers design custom feeder adapters and CNC-machine each rail from scratch. We strictly avoid off-the-shelf parts or generic sizes to ensure optimal orientation. Before leaving our Shenzhen factory, every unit undergoes a full operational test on a matching machine, and we provide a performance video so you can verify its functionality prior to delivery.
You only need to provide component samples and machine model numbers. Based on your exact part dimensions, our engineers design custom feeder adapters and CNC-machine each rail from scratch. We strictly avoid off-the-shelf parts or generic sizes to ensure optimal orientation. Before leaving our Shenzhen factory, every unit undergoes a full operational test on a matching machine, and we provide a performance video so you can verify its functionality prior to delivery.
Machine Compatibility
We provide dedicated rail adapters for all major SMT brands, including ASM SIPLACE, YAMAHA, FUJI, Panasonic, JUKI, and Samsung.
We provide dedicated rail adapters for all major SMT brands, including ASM SIPLACE, YAMAHA, FUJI, Panasonic, JUKI, and Samsung.
Lead Time & MOQ
Tag and Tube Feeders: 2–4 weeks.
Vibratory Bowl Feeders (Custom Rails): 3–6 weeks.
MOQ: 1 unit. We support single-unit testing on your production line before scaling to mass production.
Tag and Tube Feeders: 2–4 weeks.
Vibratory Bowl Feeders (Custom Rails): 3–6 weeks.
MOQ: 1 unit. We support single-unit testing on your production line before scaling to mass production.
Custom Nozzles & Integrated Shipping
We fabricate custom nozzles from ceramics, tungsten carbide, and rubber, precision-formed to match your specific part geometry while maintaining a feed failure rate below 0.5%. To streamline your procurement, feeders and nozzles are shipped together in a single package.
We fabricate custom nozzles from ceramics, tungsten carbide, and rubber, precision-formed to match your specific part geometry while maintaining a feed failure rate below 0.5%. To streamline your procurement, feeders and nozzles are shipped together in a single package.
Our YouTube channel.
